Description
| · The hydrants conform to the standard EN 14339:2005 |
| · Manufactured with strict adherence to standard: ISO 9001 |
| · All used materials are protected against corrosion |
| · Body is manufactured out of ductile iron with epoxy powder coating |
| · Automatic drain valve (remaining volume of water less than 150 ml, according to LST EN 1074-6) |
| · Insulated hydrant is supplied with 0.5 m drainage pipe |
| · Standard 6’’ threaded nozzle can be replaced without uninstalling the hydrant |
| · No hydrant stand needed |
| · Height adjustment range – 300 mm (HR-1 and HRS-1) |
| · Easy to install, light weight |
| · 2 year warranty |
| · Service life – over 10 years |
| Component | Material |
| 1. Fixed cover wire | Stainless steel EN 1.4301 |
| 2. Cover | PVC plastc |
| 3. Nozzle | Brass CuZn39Pb3 |
| 4. Bolt, washer, nut М16 | DIN933, DIN127, DIN934 ZN |
| 5. Bolt, washer, nut М8 | DIN933, DIN127, DIN934 ZN |
| 6. Holder | Stainless steel EN 1.4301 |
| 7. Label | Stainless steel EN 1.4301 |
| 8. Spindle with casing | Steel ZN, PE plastic |
| 9. Pipe DN100 | Stainless steel EN 1.4301 |
| 10. Flange DN100 | Cast iron EN-GJS-500 |
| 11. Bolt, washer, nut М16 | DIN933, DIN127, DIN934 ZN |
| 12. Gate valve DN100 | Cast iron EN-GJS-500 |
| 13. Gasket DN100 | EPDM rubber |
| 14. Elbow DN100 | Cast iron EN-GJS-500 |
| 15. Bolt M6x25 | DIN933 ZN |
| 16. Valve case | POM plastic |
| 17. Membrane | EPDM rubber |
| 18. Bolt, washer, nut М16 | DIN933, DIN127, DIN934 ZN |
