Description
| • The hydrant conforms to the standard EN 14384:2005 |
| • Manufactured with strict adherence to standard: ISO 9001 |
| • All used materials are protected against corrosion |
| • Body is manufactured out of ductile iron with powder coating |
| • Aboveground part is covered with UV resistant coating |
| • Type – double closure |
| • Breaking system with automatic closing |
| • Automatic drain valve (remaining volume of water less than 150 ml, according to LST EN 1074-6) |
| • All internal components can be replaced without uninstalling the hydrant |
| • Two conveniently placed taps DN80 with GC 80-70 GOST or STORZ type of connections |
| • Easy to install, light weight |
| • 2 year warranty |
| • Service life – over 10 years |
| Component | Material |
| 1. Cover | Cast iron EN-GJS-500 |
| 2. Bolt M10 | Stainless steel EN 1.4301 |
| 3. Valve | Brass CuZn39 M16 Pb3 |
| 4. Nut | Brass CuZn39Pb3 |
| 5. Gasket | EPDM rubber |
| 6. Spindle | Stainless steel X20Cr13 |
| 7. Hose connector | Aluminium AlSi |
| 8. Hydrant case | Cast iron EN-GJS-500 |
| 9. Pipe 45x45x3 | Stainless steel EN 1.4301 |
| 10. Connector | Cast iron EN-GJS-500 |
| 11. Bolt, washer, nut М16 | DIN933, DIN127, DIN934 A2 |
| 12. Gasket | EPDM rubber |
| 13. Fixing ring | Cast iron EN-GJS-500 |
| 14. Breaking system | |
| 15. Ring | Stainless steel X20Cr13 |
| 16. Guide | Cast iron EN-GJS-500 |
| 17. Pin | Stainless steel EN 1.4301 |
| 18. Guide | Cast iron EN-GJS-500 |
| 19. Case | Cast iron EN-GJS-500 |
| 20. Nut | Brass CuZn39Pb3 |
| 21. Bolt, washer, nut М16 | DIN933, DIN127, DIN934 ZN |
| 22. Pipe 45x45x3 | Stainless steel EN 1.4301 |
| 23. Pipe DN100 | Stainless steel EN 1.4301 |
| 24. Drainage system | Stainless steel EN 1.4301 |
| 25. Bolt, washer, nut М12 | DIN933, DIN934 A2 |
| 26. Press | Cast iron EN-GJS-500, EPDM |
| 27. Bolt, nut M16 | DIN912, DIN927 ZN |
| 28. Nut | Brass CuZn39Pb3 |
| 29. Ball | POM plastic |
| 30. Valve case | Cast iron EN-GJS-500 |
