Description
| • The hydrant conforms to the standard EN 14384:2005 |
| • Manufactured with strict adherence to standard: ISO 9001 |
| • All used materials are protected against corrosion |
| • Body is manufactured out of ductile iron with powder coating |
| • Aboveground part is covered with UV resistant coating |
| • Breaking system with automatic closing |
| • Automatic drain valve (remaining volume of water less than 150 ml, according to LST EN 1074-6) |
| • Two conveniently placed connection taps DN80 |
| • Easy to install, light weight |
| • No hydrant stand needed |
| • 2 year warranty |
| • Service life – over 10 years |
| Component | Material |
| 1. Pipe DN100 | Stainless steel EN 1.4301 |
| 2. Pipe DN100 | Stainless steel EN 1.4301 |
| 3. Holder | Stainless steel EN 1.4301 |
| 4. Holder | Stainless steel EN 1.4301 |
| 5. Label | Stainless steel EN 1.4301 |
| 6. Cap | Stainless steel EN 1.4301 |
| 7. Valve case | POM plastic |
| 8. Membrane | EPDM rubber |
| 9. Gate valve DN100 | Cast iron EN-GJS-500 |
| 10. Elbow DN100 | Cast iron EN-GJS-500 |
| 11. Spindle with casing | Steel ZN, PE plastic |
| 12. Bolt M16x70 | DIN933 |
| 13. Bolt M8x30 | DIN933 |
| 14. Bolt M6x25 | DIN933 |
| 15. Washer 16 | DIN127 |
| 16. Washer 8 | DIN125 |
| 17. Nut M16 | DIN934 ZN |
| 18. Nut M8 | DIN934 ZN |
| 19. Gasket | EPDM rubber |
| 20. Flange DN100 | Cast iron EN-GJS-500 |
| 21. Hose connector | Aluminium AlSi |
| 22. Fixed cap wire | Stainless steel EN 1.4301 |
| 23. Flange DN100 | Cast iron EN-GJS-500 |
| 24. Insulation | EPS granules, shell – PVC plastic |
